Iscar recently released a variety of different drilling innovations to meet their customers needs. These innovative products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with fresh and innovative ways to expand productivity for the customer. Here is a little bit about these new products, and how they will benefit the end user of these products.

SUMOCHAM Drills

ISCAR's new SUMOCHAM drill family is an advanced progression of the highly effective CHAMDRILL and CHAMDRILLJET drill families. The drill features twisted coolant nozzles with indexable drilling heads which are available in different head configurations for various material groups. SUMOCHAM drills can be used on milling centers or lathes.

SUMOCHAM includes four different standard drill head geometries, designed for unmatchable performance and high dependability. The drill head is manufactured with a sharp cutting edge and polished flutes. SUMOCHAM drilling heads are available in the diameter range of 8 to 25.9 mm. The drill head has ground flutes for smooth, uninterrupted chip flow and a ground gash for enhanced penetration.

The drill shank design is in accordance to DIN 9766 standard, with obtainable drilling depth to diameter ratios of 1.5XD, 3xD, 5XD and 8xD. All drill bodies feature coolant through holes. The accurate cylinder added to the clamping portion increases rigidity and decreases internal stresses. The rotation stopper planes are precision ground, which improve the control on the drilling head position and support, increasing tool performance and life. ISCAR's innovative SUMOCHAM drill line will offer longer tool life and greater productivity.

DR-DH Deep Drills

DR-DH drills can achieve drilling depth-to-diameter ratio of 7XD and up. Designed to be employed on standard horizontal milling centers, turning, and multi-task machines. Use of supplementary machine and setup can be avoided. They will be offered as semi-standard item in a diameter range of 25.4 to 69.5 mm (1.00 - 2.73").

Two versions will be available:
A Single Flute DR-DH-31.65-0350NC-2FS is a very rigid tool complete with a patented chip gullet design. It was developed for easily cut materials comparable to cast iron and low alloyed steel.

A Double Flute DR-DH-31.65-0350NC-2FD has a double chip gullet for upgraded chip flow. It was designed for drilling gummy materials like non-alloyed steel and high temperature alloys.

ISCAR DEEP HOLE DRILLS

With ISCAR's new solid carbide deep hole drills, you can easily drill up to 22 times diameter and reach bottom10% faster than with other solid carbide drills - and six times faster than a HSS drill. This capability can speed up a great number of high-volume operations. The deep-hole drilling station no longer has to slow down a transfer line or stop it exclusively because a drill broke.

Other target applications encompass deep holes for automotive, hydraulic blocks and die & mold work. A combination of features aid the twist drills to cut faster, straighter,deeper, last longer and expel chips more surely. A special high-strength core creates a more long lasting drill point and allows for deeper flutes, enlarging the departure path for chips.

The drill tip themselves has a 140 positive-point, four-margin design to maintain the edge, decrease thrust forces and aide centering and tracking. A post-coat polishing step on the flutes, margins and cutting edges reduces friction and torque that can easily snap a drill.

The latest drills are found in normal diameters ranging from 5 to 10 mm, in 20 and 22 length to diameter ratios. Special sizes are available on request. All are manufactured of IC908, a 10% cobalt submicron carbide grade, and comes with a TiAlN PVD coating, and can be reconditioned.

These are just some of the latest innovations coming from Iscar.

Iscar Recently Made Public A Variety Of Revolutionary Lines To Extend Their Family Of Milling Tools
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.

Iscar Releases A New Line Of Slitting Cutters Utilizing Tang-Grip Technology And The Durability Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.

Original Tools And Carbide Insert Compositions From Iscar To Better Enhance The Machining Process
Iscar is introducing Penta 34 carbide inserts with a new PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a different frontal edge.

Some Of The Many Advancements In Carbide Inserts Coming From Iscar
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.

Push Pull Testing For Construction Industry Supplying Calibrated Gauges. Mechanical Load Testing Methods For On Site Evidence To Testing Requirements.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.

Entirely New Rover Manufacturing Jobs
Britain's economy is trying to recover from the impact caused by the global economic recession through new Land Rover manufacturing jobs.

Innovative Car Manufacturing Jobs To Conserve The Overall Economy
The global recession the economy is experiencing in the past few years have pushed major companies to close down and stop their operations.